Sled Wrap

[mud1]

Hello, I am considering doing a tunnel wrap on my 08 RMK. This would be my first time putting a wrap on. Just was curious if anyone had any tips on how to do this from previous experiences.

Thanks

 

[summ8rmk]

Couple drops of dawn in a spray bottle full of water(fine mist). Firm rubber squeegee.
Spray both sides of the decal, sticky side (back)so u can align and remove air bubbles, picture side (front) so the squeegee slides over it and doesn't scratch the decal.
Large decals, line them up and tape the center, fold one side back to the middle and remove the backing and squeegee, then do the other side.
Take ur time.

GS6

 

[mud1]

Thanks, I appreciate the information.

 

[SU27]

Remove fuel tank for convenience. Use 3M primer on all edges. Use hair dryer on complex curves, but do not stretch more than 20%. Use as thick film as possible (4 mil for example, 2 mil wouldn't last). Than make sure your boots are not scratching it.

 

[mud1]

Thanks for the information.

 

[summ8rmk]

I forgot to mention prepping.
I used isopropyl alcohol to clean each area before applying decal.

GS6