J
JustinB
Well-known member
Okay so I posted about my sled cutting out a few weeks ago. Took it to a very good dealer here in Utah said my mpem went out so i bought a new one. Then yesterday as I was riding and out of no where my sled did it again, after it dying a few time I pulled what I could on the mountain and found my wires to my (im guessing) head temp sensor where completely cut and laying on my carb boots. So I stripped and tapped them to the posts. Sled fired right up and I rode for another hour (hard riding) then I got on a hill I could not get up tried it 3 times on the 3rd try I went to turn out and the sled died again. So I pulled the air box a 2nd time stripped the wires back more and tapped them tighter to the connectors. After that the sled ran fine all the way home. ???? any one tell me if this could be the problem causing the sudden dying?
Last edited:
