P
Can I fit 19 43 gears with the stock 76 chain. 2010 600 rmk. I know the 42 fits. Thanks to all.
simple question
- Thread starter prowop
- Start date
P
Something I said? Did some searching, seems to be conflicting reports. Looking for someone who has done it or knows someone who has. Thank you much.
V
I think I stuck with the 19:42 so I could run the stock chain. I don't think the 43 will fit without a change in chain.
P
Alright thank you for the info. Ya the 42 seems to be about the max. But there is a picture floating around of the 19 42 set up and there is a bit of slack in the chain. Im wondering on the case clearance too. I read that a little grinding on the tensioner and some carefull instalation technique and the 43 will go. Thanks for help.
B
I also went 19/42, pretty sure 43 won't work with stock chain according to everything I've been told and read.
B
Let us know if it works.
P
Haha will do guys. Its my buddies iq. Im on a pro now with a qd which really performs well and exceeded my expectations as far as handling goes. Ill see if I cam convince him to order a 43...any other info is appreciated. Thanks again.
Gear selection with my stock chain from Mountain Horse years ago.
20/39 74
20/40 74
20/41 74 Stock
20/42 74
19/40 74
19/41 74
19/42 74
19/43 74
20/39 74
20/40 74
20/41 74 Stock
20/42 74
19/40 74
19/41 74
19/42 74
19/43 74
P
Thank you very much for the info. Is it not a 76 chain??
Fiche shows stock as 76 pitch chain.
Moresno,
I've posted so much over the years... but curious where I put that up??
If I did... then I put up incorrect info from what I can tell.
Please help me out with a link...thx.
.
Moresno,
I've posted so much over the years... but curious where I put that up??
If I did... then I put up incorrect info from what I can tell.
Please help me out with a link...thx.
.
Last edited:
19 43 76 is what im running a little grinding of the case is necessary , the 74 just wont fit unless the chain is stretched
P
You all are great and know if I ever have info that I think will help ill be glad to share. Ive read so many posts and have benifited from your knowledge ( esp mtnhrs here). Thanks to all. Looks like he is going to order both, and hoping the 43 fits withsome grinding is no biggie. Ill def let you all know.
It may have been on a PM from you, I swapped in 19/42 gears without issue.
P
Hey guys, still on this. The guy ordered a 42 and 43 cause he can send one back. I should be doing it in a couple days here. Cheers.
Thanks for the update, please report back with your final gearing and chain pitch.
P
Ok, 19/ 43 will go on, with the stock 76 chain. It is snug and we needed 4 hands to do it. This is not a new chain either but its not wore out at all. I think the chain is too tight. No tensioner on with about 1/4 inch of lash or less. We went fishing which involved a 1 hour ride. I rode it for about 20 mins. Feels good to me. I suggested we open the case again to see if it loosened up a bit. Is it going cook the drive/jack shaft bearings? I realize it might not extend the life of them but?? Any way long story short 19/43 will go on with a 76 chain. Is there a reason why a 78 will not work perfect or is it just to long?
Cheers.
Cheers.
P
Slash, not sure what you had to grind but this one had enough room all around. Like I said it just seems to tight for me. Ill let you all know how it looks when we open her back up.
P
Tried the 19 43 and 78 chain. Its to long. Went with the 42 and stock 76 chain. Like I said the 19 43 went on with the 76 chain, it was just to tight for me. Cheers.
