FOR SALE Silber Turbo for D8
Complete kit for a 2008-2010 Polaris 800 CFI will work on a 700 also
kit was new last January. has about 850 miles on it, I ran it at 9-10 psi most of the winter
had it to 12 a couple of times, ran it all winter in Island Park , Idaho
Selling as a complete kit including
AEM A/F guage new with one ride, I had a inovate on first that went bad
boost pressure guage,
fuel pressure guage (liquid filled)
fuel pressure regulator,
Attitude 3.25 4 channel fuel controler ( 3.25- Fuel Controller runs all 4 injectors almost all others only run 2 injectors),
electric oil pump, with plug in for power
boost controller,
oil tank,
Turbo GT2860 RS .86,
Intake box,
charge tube,
Turbo Pipe, made by Eightysixd Industries (Derek from-Attitude Industries)
all clamps and hoses,
large high pressure fuel filter with high pressure quick release fittings,
water cooling lines to turbo center section,
Dashmount for gauges,
Stainless steel intake filter,
tunnel dump Exhaust a cover is include to cover stock hole.
$2900 for complete kit with pipe
$2550 for complete kit with out pipe.
$400 for just the pipe
If you have questions PM me or call 218-849-8653 if you would like more pictures let me know.
THE Installation Paper work is also included
Complete kit for a 2008-2010 Polaris 800 CFI will work on a 700 also
kit was new last January. has about 850 miles on it, I ran it at 9-10 psi most of the winter
had it to 12 a couple of times, ran it all winter in Island Park , Idaho
Selling as a complete kit including
AEM A/F guage new with one ride, I had a inovate on first that went bad
boost pressure guage,
fuel pressure guage (liquid filled)
fuel pressure regulator,
Attitude 3.25 4 channel fuel controler ( 3.25- Fuel Controller runs all 4 injectors almost all others only run 2 injectors),
electric oil pump, with plug in for power
boost controller,
oil tank,
Turbo GT2860 RS .86,
Intake box,
charge tube,
Turbo Pipe, made by Eightysixd Industries (Derek from-Attitude Industries)
all clamps and hoses,
large high pressure fuel filter with high pressure quick release fittings,
water cooling lines to turbo center section,
Dashmount for gauges,
Stainless steel intake filter,
tunnel dump Exhaust a cover is include to cover stock hole.
$2900 for complete kit with pipe
$2550 for complete kit with out pipe.
$400 for just the pipe
If you have questions PM me or call 218-849-8653 if you would like more pictures let me know.
THE Installation Paper work is also included
Last edited: