Silber Turbo at 2000 ft

[BrandanG]

I was wondering if anyone has a 2012 Pro RMK running a 2013 Silber Turbo kit? At 7000-9000 feet with mine I am using 76 grams of weight, and revving at about 8250 RPM. The fuel I use is straight VP C-12. Turbo kit runs great and I have had no issues. I am wanting to run the kit at around 2000 feet now and am looking for suggestions for weight, control box settings, and secondary helix angle. Any help would be great.

 

[BrandanG]

I would like to run about 10 pounds of boost.

 

[m1kflyingtiger]

Not sure how much differences in power there is between te 12 kit and the 13 kit, but I'm running an 11:1 head, 8 psi at sea level to 3000' and pulling 79.5g with Justin's helix and springs.

 

[BrandanG]

Thanks! Do you happen to know what helix angle you are running.

 

[Boyko]

Just turn the boost down and make the same hp, at 2000 feet it gets flat, windy, and hard. Good luck using the same power on faster terain.

 

[BrandanG]

Thanks for the the input, but I would like to run full boost just wondering roughly how much weight would be required and if the team adjustable kit would be enough.

 

[m1kflyingtiger]

Off the top of my head I don know. Ill be home in two days to look, I think it's the steeper of the two cuts.

 

[Duramax325]

80 grams at 8.68pounds 8200 rpm at 1800 feet 50/50 av gas pump gas