Secondary Clutch 2013 Pro HELP!!!!

[WhiteRoomed]

I had removed my clutches, because I am installing a SLP stage 2 kit. I took them to my local shop to have them do the weights and springs. So I had left my bolts and washers carefully assembled and placed in what I thought was a safe area. I think my wife accidentally knocked everything over romping thru the garage, we will however never know....... Because I found 2 other washers in a weird place, I think go in between the secondary and the jack shaft. with the bolts and other exterior washers,bushings and in place. I tightened it down but have the tiniest (very slight) bit of play on the clutch. Is this normal??

I only have two washers between the clutch and the shaft housing and ont he parts site it shows 3. Please help bring some clarity.

 

[mtncat1]

there is probably no problem they should have some movment.i'd bet your ok

 

[WhiteRoomed]

Thanx, I thought there should be a touch, Im gonna dial in this map, before it gets too late, and running it wide open in my garage probably wont make the neighbors too happy.

 

[mtncat1]

yeah it's a bummer this year went by way to fast