Seat Height and Peg Height Thread

[M5-]

As requested in order to not screw up the Riot/Riot s thread post seat heights here. Track flat on the floor but on the wheel dollies. 2018 YZ450 2020 Camso with a complete Yeti front end.

Seat 38.125
Pegs 17.0


M5

 

[CB-BLR]

2020 ARO 3 S with Seat Concepts Low Seat. Track flat on the floor, but front on Timbersled wheel Dollies. 2020 KTM 500 XCF-W

Seat 35.625"
Pegs 15.5"

 

[AllHatNoCattle]

2020 ARO 3 S with Seat Concepts Low Seat. Track flat on the floor, but front on Timbersled wheel Dollies. 2020 KTM 500 XCF-W

Seat 35.625"
Pegs 15.5"

Love that low seat height!!

 

[CATSLEDMAN1]

2014 KTM 500 stock set foam thickness with an Enduro Engineering seat. 1.3" spacers in shocks, 3" spacers in forks. My shop notes show that lowered my bike 2.6" from stock.

Seat 38 foot peg 17

Not sure how the newer bikes with the RiotS are that much shorter than mine ? 2021 KTM with ARO3 feels way higher than mine, never measured it but its TALL. 2019 450 Beta with 120 ARO, when I ride it you are back to climbing on it, not swinging a leg over it ?

35" seat height, love to try that and maybe I can see a little foot dragging on sidehills with a peg 2" lower than mine.

 

[M5-]

Husky 501 with 2021 Yeti
Seat 39.25
pegs 18

 

[GaNiBiS]

2014 YZ 450, 18 ARO 137 w TSS and rear swing arm mounted 1" higher

Pegs - 18 1/8"
Seat - 39"

Sent from my LM-G900 using Tapatalk

 

[Praisegeetarman]

2017 Honda CRF450RX and 2021 Yeti Freeride.
Seat - 40"
Pegs - 18"

 

[mumur]

2019 Honda CRF450R and 2016 (?) CMX kit, flat on the floor no wheels.

Seat - 38"
Pegs - 16.5"

 

[Hawkster]

Seat 32"- 34"
Pegs 18"

 

[00Tundra]

2018 YZ450FX ARO3. S- spindle, 1.5" spacer in shocks. Bike flat on floor no wheel kit. ( note stock springs. New springs on order.)
35" seat
14 1/2" peg

 

[Praisegeetarman]

2017 Honda CRF450RX and 2021 Yeti Freeride.
Seat - 40"
Pegs - 18"

Same bike now with a 2021 Riot Velocity

Seat - 39"
Pegs - 17"

 

[needpowder]

2023 yz450f w/ riot 3S. Stock seat. TSS about 250lb’s. Forks .56 springs revalved for holdup/ bottoming resistance for snow biking.
16” peg height
36.5” lowest part of the seat.