RSI handlebars

[800dragon_rmk]

Very interesting in geting some different bars on my 2011 pro rmk. I am unable to see any RSI bars our anything in person so this is why im asking here. I want something that is like the stock pro tapers with a 2 inch riser block. there are a bunch of different bends but i have been looking at the
7/8" CHROMOLY RISE HANDELBARS or i like the carbon fiber bars but not sure what kind of bend to get. also can i use the piviot style riser on the Pro? i tried doing a search but nothing came up with the questions i had so i made a new thread.

Thanks guys

 

[IQRIDR]

Very interesting in geting some different bars on my 2011 pro rmk. I am unable to see any RSI bars our anything in person so this is why im asking here. I want something that is like the stock pro tapers with a 2 inch riser block. there are a bunch of different bends but i have been looking at the
7/8" CHROMOLY RISE HANDELBARS or i like the carbon fiber bars but not sure what kind of bend to get. also can i use the piviot style riser on the Pro? i tried doing a search but nothing came up with the questions i had so i made a new thread.

Thanks guys

If you want to use the pivot risers you will need the pivot adapter then you can go to that whole setup easy.

 

[800dragon_rmk]

i want to go to the pivot style riser but i have no idea how tall of a riser to get and im not sure how tall the bars are. looking for something around 1-2 inches taller stock

 

[meathooker]

the new Burandt bars look like a good bend, and have provisions for a side hill bar integrated into the cross bar for a clean install. i had the carbon bars on my old IQR and loved them, cant go wrong with either imo

 

[fourseasons]

Four Seasons Sport & Marine in South Dakota Carry them and have installed them on a couple snowmobiles already! They look awesome and I'm sure they will work great!

 

[IQRIDR]

The backcountry bars/4" riser/pivot adapter will put you an inch over stock. 5" will put you 2" above.

 

[Kestrel2126]

Replied to your PM. adapter adds 1 1/2", then Pivot Riser in whatever height, plus bar style. Personally like the flat bar, backcountry bend w/15* pullback, and saw 1/2" off either end. Mine is like 1/2" above stock height

 

[AndrettiDog]

Here are the Burandt RSI bars next to the Pro Tapers. You can see a slight bend difference and the RSI bars are longer with the RSI bar ends. For that reason I cut them down a little. I did the extended heaters. Nice!

 

[prosledder]

RSI Riser

Here's my setup. I did the pivot adapter (although I'd like to replace the whole stem to the standard RMK version) and if I remember a 6" riser with race bend bars (chromoly). They are just a bit too tall cause I was wanting them the same height as the stock Pro Tapers but didn't realize how much the adapter added. Let me know if you want my riser...

 

[800dragon_rmk]

Prosledder would you say the set up you have is taller then stock? Or ?

 

[hostile1]

800dragon how tall are you? reson i ask is you might find lower bars make you a better rider. I didnt believe untill i tried it and i am now waiting on my burandt bars from rsi. you should be able to stand on your sled like your ripping across a field and your arms should be straight or close to it with a slight bend in your knees.

 

[prosledder]

Prosledder would you say the set up you have is taller then stock? Or ?

Yes. Without holding the stock bars next to them I'd say 1.5" or a tad more. Like I said, the difference is probably in the adapter. Actually feels pretty comfortable for me (I'm 6-3).

 

[800dragon_rmk]

I'm around 6 foot 1

 

[prosledder]

Some of it also has to do with rider preference as well. I need to check my work e-mail and see for sure what height riser it is and let ya know.

 

[prosledder]

Some of it also has to do with rider preference as well. I need to check my work e-mail and see for sure what height riser it is and let ya know.

I just checked and I did order the 6" riser.

 

[sledneck_03]

Here's my setup. I did the pivot adapter (although I'd like to replace the whole stem to the standard RMK version) and if I remember a 6" riser with race bend bars (chromoly). They are just a bit too tall cause I was wanting them the same height as the stock Pro Tapers but didn't realize how much the adapter added. Let me know if you want my riser...

i like that set up alot, but i would go with rox adjustable height risers and the wrench less levers. Max height for standing and min height for sitting.