Right side hand warmer not working?

[nostpete]

21 Summit expert Turbo, right side hand warmer stopped working halfway through a ride. I put the heat film leads directly to a 12v battery and it warmed up quickly. I did measure the output and a getting a voltage reading to the right side when the sled is running. The left hand works fine and warms up even at idle.

I attached another hand warmer still attached to an old bar it did not heat up either. Could it be the switch or something else?

My stator did pop and took out the ECM and Shot may have caused other electrical issues been running fine for about 400kms.

 

[AkSledHed]

Unhook the connector and check the pins inside and see if one might be pushed back, had a very similar issue with my 21 Summit and I ended up changing out the connector because the pin wouldn't lock in place.