Revelstoke - clutching recommendations for 800 Axys Pro RMK

[Pol600]

Hi,

Planning a trip to Revelstoke this winter. Noticed elevation in town is 1400ft and nearby peaks are ~8000 ft.

Appreciate any recommendations on clutching set-ups that worked well.

thanks

 

[BILTIT]

Clutch for 8000 as provided in the manual to start with.

Sent from my SM-G925W8 using Tapatalk

 

[Jimb]

FYI alpine starts at approx 5500, most of your riding is below 6500.

 

[XFIRE800]

I can check whats in my sled.

 

[adamg]

Need to know your track length and lug height. I had to drop a couple grams on my 3" 163.

 

[Pol600]

155"/2.6" - thanks

 

[Pokey]

Keep the stock 64 weights. Run a 120-310 primary spring and 120-200 secondary spring.

 

[jhurkot]

I'd just run 10-66 stock weights. I run 10-68s with SLP exhaust. Same track length.


Sent from my iPhone using Tapatalk

 

[SLP]

Hey guys, thought I might throw our clutch kit spec out there for your elevation:
Drive Clutch:
Blue/Pink Spring
71 gram MTX weights and a 3 gram rivet in the tip.

This will work well for a stock pipe or SLP Pipe.

It gives better squeeze on the belt for better bottom-end response and more consistent performance.

Runs 147.70 plus shipping.

 

[snobyrd]

Hey guys, thought I might throw our clutch kit spec out there for your elevation:
Drive Clutch:
Blue/Pink Spring
71 gram MTX weights and a 3 gram rivet in the tip.

This will work well for a stock pipe or SLP Pipe.

It gives better squeeze on the belt for better bottom-end response and more consistent performance.

Runs 147.70 plus shipping.

I run 71 hrm mtx empty at 4000 feet on a 155 2.6, i found the bottom end not to be real strong and hitting 8300 at times, feels a little zippy, im gonna give this a try