Reputable Dirt bike suspension shops in UT?

[Dogmeat]

I'm trying to figure out if there is anywhere in UT that does a lot of suspension work on dirt bikes ...

Basicaly what I am trying to do is figure out a way to lower a 2007 Honda CRF 450X to a seat height that a shorter person can ride.

The stock seat height on that bike is ~37 inches, I need the seat height to be ~32 inches.

We've tried 23 degree tripple clamps, sucking the forks up into the tripple clamps about 3/4", and a Kouba lowering link .....

But the seat height is still about 2" too high.

Anyone have any ideas where I could take this bike to have this done professionally?

 

[powderules]

You might consider cutting the seat down a little bit. We do some suspension work, but no lowering. I know there are suspension shops in California that do it. If you decide to go out of state, I'll give you some suggestions.
Thanks,
Jeremy

 

[JustinB]

Pro Action suspension hands down. http://www.pro-action.com/ I rode with their suspension for 12 years they know how and what they are doing. That and if there is a local race they will be there and all you have to do is walk up to them and ask. They will set your suspension up right there at the trailer awesome people a family that loves motorcycles. They are here in Utah as well so quick help and turnaround.

 

[Killerk]

X2 on the seat.
I'm sure you could find a freestyle seat that would work, or cut you're own down.
With all that you have done to the suspension I would leave it at that.