Remember the Minnesota CO making big wheels? Performance Machine?

[Mortgage Paul]

The nice billet ones with the rubber? Performance Machine or whatever it was called?

Anyway, I have a 8" big wheel kit for 3 wheels, 2 outer and 1 inner for Polaris Edge RMK chassis.

In the process of moving, before installed, I lost one of the wheels, so I have 2.

What would it take to just use the 2 on the inside and forgo doing the stock 3 wheel setup?

Do I need spacers for the outer wheels, or should I just out some spare bearings there, sans wheels?

Can I even use the offset axle with just 2 wheels?

i"ll be honest, I havent seen this stuff in over a year so I'm not sure what it looks like or what I need.

Do I need to get a new offset axle? Or can I make what I have work?
Help!?

 

[wideopenlemans]

Polaris

I would post this in Polaris sleds for help.

 

[SnowSnob]

If you don't care what it looks like you can use what you got. Otherwise sell your current offset axle and get one made for 2 wheels.

 

[Mortgage Paul]

I figured I might have to do that. Unless I round up another 8" wheel for the inside right?

 

[Headrush]

The nice billet ones with the rubber? Performance Machine or whatever it was called?

Anyway, I have a 8" big wheel kit for 3 wheels, 2 outer and 1 inner for Polaris Edge RMK chassis.

In the process of moving, before installed, I lost one of the wheels, so I have 2.

What would it take to just use the 2 on the inside and forgo doing the stock 3 wheel setup?

Do I need spacers for the outer wheels, or should I just out some spare bearings there, sans wheels?

Can I even use the offset axle with just 2 wheels?

i"ll be honest, I havent seen this stuff in over a year so I'm not sure what it looks like or what I need.

Do I need to get a new offset axle? Or can I make what I have work?
Help!?

They went bankrupt and screwed a lot of people over.

 

[Mortgage Paul]

I knew they went BK but I always got everything no problem as did a lot of others.

DIdn't someone on here buy the rights, or tooling for everything? I could have swore someone was selling the EXACT same wheels with the rubber etc.

I just want to know what the best way to just run 2 inner wheels would be so I dont have to buy another wheel.

Do I need to just get a new 2 wheel offset axle for the 8 inch wheels?

If so, who's is best? And do they come with everything to just bolt it in, ie spacers for the outside wheel missing etc???

 

[truthrider]

I have one extra 8" wheel with rubber coating that I had on my 04 RMK. It has a 5 point star pattern, each point has to spokes. Make me an offer if interested. I got it from a company in Thief River, MN, caller Hi performance engineering. (Hy-perf.com) As of last season they still sold the wheels. The ones I have are made by Wahl brothers. Let me know on the wheel if interested, the other two broke and I am not replaceing them.