Received New Push with Standalone Vi-Pec
- Thread starter realbass
- Start date
C
champyfz450
Well-known member
Wow! Good lookin kit!!
R
realbass
Well-known member
It looks amazing!!!
Need Clutch kit, AFR gauge, Boost gauge, also Fuel Pressure gauge if you want.
It still doesn't has instruction of install, but i am waiting it. Coming Soon...
Sorry of my English... I am from village... lol
Pics and video or it's not true!!
R
realbass
Well-known member
Did not you see picture of it?
Do you need video? Ok. I will show it to you today some later.
(very slow internet connection right now, you would remember, village
)
Last edited:
K
Kestrel2126
Well-known member
Good looking kit. More importantly, great looking floor! Seriously, do you have a tiled garage? I wish my garage floor was half that clean. If you tell me you've got radiant hearing, I'm coming over to work on my sleds this winter!
R
realbass
Well-known member
Hi guys. I glad that it thread interesting for all.
http://www.youtube.com/watch?v=wYprJhz8WVE&feature=plcp
Today i tryed to connect the Vi Pec ECU for stock Polaris connector.
Unbeliveble, but it working
In Russia a lot of good garages has tiled floor. It is good tone, also it clear, easy to wash and looking good. I would reccomend it for you Do it...
(i can open to you a little secret, in mega good garages has heated tiled floor...
Hay man, your turn is next. lol
http://www.youtube.com/watch?v=wYprJhz8WVE&feature=plcp
Today i tryed to connect the Vi Pec ECU for stock Polaris connector.
Unbeliveble, but it working
In Russia a lot of good garages has tiled floor. It is good tone, also it clear, easy to wash and looking good. I would reccomend it for you
Do it...(i can open to you a little secret, in mega good garages has heated tiled floor...
Last edited:
Awesome! Keep us updatet
R
realbass
Well-known member
Awesome! Keep us updatet
You should be sure i will post any new info.
At next week i will try install it.
Did not you see picture of it?
Do you need video? Ok. I will show it to you today some later.
(very slow internet connection right now, you would remember, village
picture didn't work for me in your first post!
Looks like a damn restrictive air box, especially for being force fed. Too many sharp 90's for good laminar flow. Would be much better off with an inverted "Y" and mandrel bent aluminum or silicone 90's. Or a siamese'd rams horn style reversed collector. When your moving better than 300 cubic feet of air a minute flow is everything. Without any boost a 800 cc engine will be pumping ~230 cubic feet of air a minute and each pound of boost adds to that. If my math is correct at ~11.5#'s of boost your moving over 400 cubic feet per minute! All those square corners are stealing flow and adding turbulence and even more heat to the intake charge, Pissing away a portion of what you paid good money to gain. Just because they were to cheap to spend another $100 to make it flow!
It's like leaving a rag in your High flow intake tube.
It's like leaving a rag in your High flow intake tube.
Looks like a damn restrictive air box, especially for being force fed. Too many sharp 90's for good laminar flow. Would be much better off with an inverted "Y" and mandrel bent aluminum or silicone 90's. Or a siamese'd rams horn style reversed collector. When your moving better than 300 cubic feet of air a minute flow is everything. Without any boost a 800 cc engine will be pumping ~230 cubic feet of air a minute and each pound of boost adds to that. If my math is correct at ~11.5#'s of boost your moving over 400 cubic feet per minute! All those square corners are stealing flow and adding turbulence and even more heat to the intake charge, Pissing away a portion of what you paid good money to gain. Just because they were to cheap to spend another $100 to make it flow!
It's like leaving a rag in your High flow intake tube.
hmmm...your kinda a party pooper...i can get 400 cubic ft a minute through a straw sucking up the bottom of my milkshake..
Prove it and post it on You Tube for us to laugh at! That is a lot of milkshake, a cup 10'x10'x4' deep in a minute. Brain Freeze UP! Again Prove It!
Prove it and post it on You Tube for us to laugh at! That is a lot of milkshake, a cup 10'x10'x4' deep in a minute. Brain Freeze UP! Again Prove It!
if you make the 400 cu ft container with a nipple i will suck er dry for youtube...hahaha...
but on the other subject i know realbass got real SCREWED in a used purchase on a kit and i am just happy for him to have a NEW kit and i am certain it will work real good for him...so i just want to be happy for him.
.you are showing up drunk to his wedding...
if you make the 400 cu ft container with a nipple i will suck er dry for youtube...hahaha...
but on the other subject i know realbass got real SCREWED in a used purchase on a kit and i am just happy for him to have a NEW kit and i am certain it will work real good for him...so i just want to be happy for him.
.you are showing up drunk to his wedding...
My bad! I hope I'm wrong and he is tickled sh_tless with how it performs! Keep us apprised of the smile factor and I will eat my words. There may be clearance issues for fitment that didn't figure into my critique.
I think this Push kit wil work better then you think.
V
Vi-PEC Powersports
Well-known member
the initial tune will be 8lbs with EBC on pump gas 91 at +/- 203 hp(based on -2 celsius air intake temp.) from sea level up to 12000 feet elevation.
initial testing results was 191 hp with ambient temp around the 110 degrees farenh...you may go to push turbo website and check the dyno vid.
E
edavis0202
Well-known member
How does this compare to the HM kit with Vipec?
I thought HM was the only one using the Vipec?
I thought HM was the only one using the Vipec?
Last edited:
