I know I've seen some rear footrest for hill climbing that rivit on your tunnel but I can't find them anywhere. I need them for a 2001 RMK. Does anyone know where I can find them?
Rear footrest?
- Thread starter Midwest RMK
- Start date
Black diamond makes them for the M series...Im not sure if they would work on an RMK or not. whould have to do some measurements.
Ski-doo makes them for the rev's, would probably retrofit. Fabcraft also sells poly ones that bolt through the tunnel, my problem is that I have seen tunnels slightly bent up by the one bolt, but hey, might they might be just fine!
Had the Fabcraft on my 2000 RMK ... they got pitched after the 2nd ride. Too slippery and started to tweak the tunnel due to single bolt mounting. Don't waste your money 
I have the Fabcraft poly pegs but they mount with 3 bolts.
But they are some of the best ones I have seen.
http://www.snowest.com/forum/attachment.php?attachmentid=34468&stc=1&d=1225296697
But they are some of the best ones I have seen.
http://www.snowest.com/forum/attachment.php?attachmentid=34468&stc=1&d=1225296697
Last edited:
I can't believe there are that many people that use these things. Aside from a stopper, if my foot actually slipped, I can't imagine riding (even the steeps) in a position like this.
Had them and took them off.
They seem like a good idea, but just end up being a good place for snow and ice to build up and then your foot slips off for sure. Especially when riding in deep snow.
Just my .02
DOO sells them, nice and aggressive anti-slip teeth, just rivet to tunnel
They seem like a good idea, but just end up being a good place for snow and ice to build up and then your foot slips off for sure. Especially when riding in deep snow.
Just my .02
DOO sells them, nice and aggressive anti-slip teeth, just rivet to tunnel
