quick thanks to silber

[sumtinwong]

just a quick thanks to silber for the turbo, runs flawless and took 3 hrs give or take a few for me to install with my 3 year old boy and 4 year old girl !
and one more shout out to AK fullthrotel for the recommendation of the use of indy dans low elevy. turbo setup {weights helix and springs} ! 5 pounds of boost no over tacking cool clutches at 2000ft. just sore arms and a need for a led brick to keep the front down


*THANKS GOING TO BE A FUN YEAR*

 

[wellfed777]

guess you might have to change your handle

sumtinright ha ha



congrats

 

[AKFULLTHROTTLE]

No Problem! Glad to see another happy boost addict!

 

[xpspenziv]

The pusher man. Don't be scurred. Throw the 3# in there. Straight av gas. I did. 3-6000 FT here.

 

[snoballssnoglory]

I've called Justin 3 times in the past year with general turbo questions. Has answered the phone all 3 times and was in no hurry to get off the phone with me. Very valuable information on all 3 calls. I believe if he can continue with the support side of it the way he has in the past his business will have few limits. Problem is the larger volume of customer base the harder it is to keep up w/ great customer service. I'll be interested to see how Silber addresses these issues in the future.

 

[AKFULLTHROTTLE]

I've called Justin 3 times in the past year with general turbo questions. Has answered the phone all 3 times and was in no hurry to get off the phone with me. Very valuable information on all 3 calls. I believe if he can continue with the support side of it the way he has in the past his business will have few limits. Problem is the larger volume of customer base the harder it is to keep up w/ great customer service. I'll be interested to see how Silber addresses these issues in the future.

He is very backed up with the current demand of kits but still tries to take time and answer the day to day questions. We as dealers really try and help in this department, so he can continue to pump out that extremely nice product all day every day!

The positive comments are great to hear!

 

[snowracer21]

snip

I'm in the process of installing my non-intercooled Silber kit right now. Waiting on my ECU, so I'm in no rush...

Did you do anything else extra that was not mentioned in the install instructions? I figured now is the time to take care of anything else with the sled stripped down... I just added some heat tape to the CF structure and coolant bottle. Thinking about doing the SLP torque arm as well.

 

[2005 1m]

I'm in the process of installing my non-intercooled Silber kit right now. Waiting on my ECU, so I'm in no rush...



Did you do anything else extra that was not mentioned in the install instructions? I figured now is the time to take care of anything else with the sled stripped down... I just added some heat tape to the CF structure and coolant bottle. Thinking about doing the SLP torque arm as well.

I’m also new to the silber kit and owning a turbo too for that matter, but for what it’s worth... I did the torque arms, new motor mounts, heat tape the coolant bottle like you mention, and plenty of heat tape on the coolant and oil lines. Also new plugs gapped to a tight .020 as I’ve seen that recommended quite a few times.


Sent from my iPhone using Tapatalk

 

[AKFULLTHROTTLE]

Like said, gap your plugs for sure.

 

[AKFULLTHROTTLE]

I'm in the process of installing my non-intercooled Silber kit right now. Waiting on my ECU, so I'm in no rush...

Did you do anything else extra that was not mentioned in the install instructions? I figured now is the time to take care of anything else with the sled stripped down... I just added some heat tape to the CF structure and coolant bottle. Thinking about doing the SLP torque arm as well.

What year Axys?

 

[Cornfusion]

Ak, how do you route the outside coolant line with the 90? I have it going at about 5 oclock but concerned about it being so close to the muffler. I saw one pic that had it run between the compressor and turbine housings but was concerned about the turbine housing melting the line. The 90 seems to be too short in depth, if it was .5" longer I could rotate it closer to 3 o'clock and be fine I think. But really all in all it was about as easy an install as it could be.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[AKFULLTHROTTLE]

This is how I am running them now. Up and over the top. The compressor side will not melt anything. Once they go over and down I secure them to the cross post and a couple other places to make sure they dont touch on the under side of the pipe or springs.

 

[Cornfusion]

thanks! I think ill try it that way.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[sumtinwong]

I did do a handful of things when I put the turbo on... iceage rail stiffeners - avid drivers - slp toque arm - tether - fully clipped track - br9 eya plugs {not the es} gaped as stated above - full slp vent kit {intake breather and cowling heat eliminating kit} - striped all foam off the panels for better cooling {I did heat tape a few spots that were close to the pipe/turbo} - heat taped the lines that were talked about above - indy dans low elevation turbo kit {as stated above} -sealed the back of all relay plugs with black form-a-gasket and relay to plug with die-electric grease tanking care not to get any on the connectors! - the rest was just for looks\comfort sled wrap - under seat bag - orange led lights - 1 in off set ZRP spindles... oO0 and a driven clutch bearing and washer that ZRP sell's to prevent spring bind and promote quicker back shifting... probably missed something but that's the majority of it! lots of what I did was not necessary but if I did it again.... I would do it all again!!! I regret nothing I got { well I cheeped out on the iceage rail stiffeners I do wish I would have just bought the iceage rails that are stronger than stock but a@Aa the stiffeners are a fair product too} . lots of what I did was to try to ensure a long and trouble free sled that provides to much HP and not enough break downs to enjoy the scenery you get to see when your getting towed out!!! to each his own... just smack that turbo on and ride or try to do some preventive maintenance either way is up to you!!!! have a good year we have ben riding in alaska for 3 or 4 weeks now!!! oO0 ThE SnOw

 

[snowracer21]

What year Axys?

2017

 

[snowracer21]

I’m also new to the silber kit and owning a turbo too for that matter, but for what it’s worth... I did the torque arms, new motor mounts, heat tape the coolant bottle like you mention, and plenty of heat tape on the coolant and oil lines. Also new plugs gapped to a tight .020 as I’ve seen that recommended quite a few times.


Sent from my iPhone using Tapatalk

I'm using that aluminum foil type heat resistant tape for the side panels...but was unsure how to wrap the coolant and oil lines...you just wrapping them in the same type of tape, or is there specific tape for rubber/silicone hoses?

 

[cdebodt44]

I'd also like to thank ak full throttle for doing all the testing and leg work for clutching for us sea level guys. Just purchased a Silber and he has been nothing but helpful for a newbie turbo owner!


Sent from my iPhone using Tapatalk

 

[AKFULLTHROTTLE]

2017

Perfect, just making sure it was not an 18.

 

[Yaeger34]

Can't say enough good things about silber myself as far as customer service. Justin has been there to answer any questions and so has Corey Boston. Only got 2 days on the product on snow and so far it is a riot, see how the durability test does from here.

 

[sumtinwong]

I used thermo-shield made by cool it thermo tec on the hoses and the tin tape on the hood. the thermo-shield is definitely a better product than the tin tape it is tin faced with a fiberglass back with an adhesive backing..... but im sure the tin tape will be fine.