So this was a issue with a number of sleds early but seems has died off due to "driveshaft or belt failure". I was looking at the guards and ended up buying a UTV Tech guard after looking at the wrp. Seemed to be the UTV covered alot more area and was better priced to for the amount of guard a person gets. JMO SO anyone that had been out had an issue with just snow pushing up the plastics into the pulley/belt, or no one looking anymore?
QD Belt Guard
- Thread starter lucasMX358
- Start date
Could you post a link for the UTV guard? Thanks!
S
suitcase
Well-known member
http://www.teddunlimited.com/
Check out what todd has to offer, for the UTV QD guard. It is very clean looking fit.
Check out what todd has to offer, for the UTV QD guard. It is very clean looking fit.
Nice product.
Great "heads up" Lucas & Suitcase..
Now that is pretty slick!! Lots of coverage and distributes the load over a wider area.
$55 price tag is great too.
That would be one of the first items on my list!
Great "heads up" Lucas & Suitcase..
Now that is pretty slick!! Lots of coverage and distributes the load over a wider area.
$55 price tag is great too.
That would be one of the first items on my list!
UTV Tech Polaris Pro RMK Belt Drive Skid Plate
Protect the belly pan and drive belt of your 2013 Pro RMK from damage.
The new belt drive has very little clearance below it, allowing the belly pan to flex and come in contact with the lower pulley and belt.
Prevent that from happening with this skid plate from UTV Tech.
Also fits the 11' & 12' Pro RMK to protect the chaincase.
Pro RMK Belt Drive Skid Plate:
$55.00
Last edited:
T
Tedd
Well-known member
Thanks to all of you for posting this. Just wanted to add to the information about these skid plates.
The two inner rivets are utilizing factory rivet locations in the bulkhead. The rear outer rivet is actually a allen head screw that goes through the end of the rail. The forward outer rivet is the only one that is in the plastic.
We are currently down to having only 5 left. We will have more available next week. Once the 5 that we have are gone, we will take preorders until we have more in stock.
The two inner rivets are utilizing factory rivet locations in the bulkhead. The rear outer rivet is actually a allen head screw that goes through the end of the rail. The forward outer rivet is the only one that is in the plastic.
We are currently down to having only 5 left. We will have more available next week. Once the 5 that we have are gone, we will take preorders until we have more in stock.
ordered mine, thanks!
T
Tedd
Well-known member
We are currently sold out...... We are expecting to have more available on Monday.
We are working hard to have some available at the show this weekend, unfortunately I can't guarantee it.
We will also have one installed on a sled at the Boise Show for those of you interested in seeing them at the show.
We are working hard to have some available at the show this weekend, unfortunately I can't guarantee it.
We will also have one installed on a sled at the Boise Show for those of you interested in seeing them at the show.
C
clamlake600
Well-known member
mine is ordered!! anyway to close off drain hole? make a 2013 bd specific to keep out the snow? I'll take one of those... thanks for a great looking product. Ray-jetboyz motorsports
T
Tedd
Well-known member
Man, I hope one of those last few was shipped to Baker, Montana!
Today is your lucky day.....
Today is your lucky day.....
Ha! I didn't order one myself, but I think you just ruined my wifes Christmas gift surprise to me! No worries, I usually figure them all out before Christmas every year. I start my mission late October and usually by mid-December I know everything that will be under the tree. Lets just hope she doesn't read this!
T
Tedd
Well-known member
Ha! I didn't order one myself, but I think you just ruined my wifes Christmas gift surprise to me! No worries, I usually figure them all out before Christmas every year. I start my mission late October and usually by mid-December I know everything that will be under the tree. Lets just hope she doesn't read this!
Now I feel bad.....
Uhhhh, sorry, yours didn't get ordered or shipped.... Maybe by Christmas, If your lucky.
Similar threads
