Propane rack for V-nose trailer

[sledstormed]

Looking for a propane rack system to mount two 5 gallon propane tanks on the front passenger side of my trailer. Does anyone know who sells these? Thanks!

 

[sandorsnow]

I made my own. You might try an RV dealer.

 

[sledstormed]

I made my own. You might try an RV dealer.

You don't by chance have any pics? Thanks.

 

[Jordo]

Im tryin to put 2 40lbs tanks on the front on my trailer too, I have a flat front trailer thou. would like to know of a good way to mount them too.

 

[brian_moreau7]

I ordered mine from http://www.adventurerv.net Very Good Service from this place and fast shipping as well!! ..... The base allows you to install Two 20lb, 30lb, or 40lb tanks...

You need to order the Base:

http://www.adventurerv.net/base-for-gas-cylinders-tank-p-8374.html

And The Center Rod for whatever size of tank you are installing ( 30lb In This Case)

http://www.adventurerv.net/center-rod-for-bottle-rack-p-8376.html

 

[Dogmeat]

Does anyone know where to fine the canvas bag to cover twin 30-lb propane bottles that fit on a rack like that?

 

[cableguy]

jc whitney should have cover and bases also

 

[sledstormed]

Brian, which one did you get. I don't see a rack for a v-nose..

I ordered mine from http://www.adventurerv.net Very Good Service from this place and fast shipping as well!! ..... The base allows you to install Two 20lb, 30lb, or 40lb tanks...

You need to order the Base:

http://www.adventurerv.net/base-for-gas-cylinders-tank-p-8374.html

And The Center Rod for whatever size of tank you are installing ( 30lb In This Case)

http://www.adventurerv.net/center-rod-for-bottle-rack-p-8376.html

 

[brian_moreau7]

Does anyone know where to fine the canvas bag to cover twin 30-lb propane bottles that fit on a rack like that?

There is one on the Mirage trailers website that I found, Black and it says it fits all sizes...


http://parts.mirageinc.com/products/426-vinyl-black-propane-tank-cover.aspx

 

[brian_moreau7]

I used the standard base plate on mine, fits perfectly between the Jack and the Tip of the V-Nose....

http://www.adventurerv.net/base-for-...nk-p-8374.html

Brian, which one did you get. I don't see a rack for a v-nose..

 

[sledstormed]

How much space do you have between the jack? Mine is tight..

I used the standard base plate on mine, fits perfectly between the Jack and the Tip of the V-Nose....

http://www.adventurerv.net/base-for-...nk-p-8374.html

 

[brian_moreau7]

How much space do you have between the jack? Mine is tight..

I don't have much room either, just enough to fit the Base Plate with a few inches to spare on either side with the tanks on......

but when I get some spare time I will get you a proper measurement....