Proclimb boondocker tial

[zr900turbo]

Hi

I have bought a 2014 m8000 with a intercooled tial GTX2860 kit on it. I still use stock head at sea level (Norway, 100 meters over sea)
What kind of HP do you think i am pulling? I ride straight pumpgas at 7# of boost. NO DET YET
What kind of hp do this kit produce at 7#? 10#? 12# and 14#?

Going over to 30% avgas mix and 10# soon

 

[kcdavidak]

Just for an idea , I run a 13 pro climb wit.h a bd gtx 2863 inter cooled at 10 lbs
On straight av gas , 1500 ft to 2500 ft

 

[mk2g60]

first thing to do is get the head recut for low elevation, must for any turbo sled.
second dump that av gas in a air plane because that's where it belongs! buy some race fuel, av gas does more harm than good it's not made to run in 2 stroke motors at low elevation bottom line!

 

[kcdavidak]

Head cut no

Doesn't need a low compression head he should be running an3*ekey

 

[Polarisrocks]

Get a speedwerx 2.5 degree advance timing key under the flywheel and get a 3 degree boondockers timing retarder and it will help with your bottom end and the avgas. Avgas is great.. don't let a few idiots out there make you think different.

 

[Polarisrocks]

Don't lower the compression.. or you will loose your bottom end responce

 

[av8er]

the Above Negative post about Avgas at Sea Level

the guy is smoking Crack! Avgas is 100 Octane fuel at any altitude Sea level to
25,000.

 

[zr900turbo]

I do run the boondocker timing key, many people around here run on avgass or as we call it 100ll. 100 octane low lead.
I run 98 octane pumpgas now at 7#. But will turn it up to 10# with 50% 100 octane.
They run 10# with the low compression rktek heads over on straight pumpgas