Pro RMK rails to Axys rmk rails

[xmk1080]

Does anybody know the exact difference from the pro RMK rails to the axys RMK rails? I'm thinking it's the rear mounting hole location is moved back but I'm not positive, thanks.

 

[Audette13]

I'm currently using Axys Rails with 14 Pro suspension on my pro.

No problems or mounting issues. Not sure if there is a difference.

Seems like you could use pro rails on the Axys, Pro rails just a little thicker and less holes cut into them

 

[diamonddave]

I'm currently using Axys Rails with 14 Pro suspension on my pro.

No problems or mounting issues. Not sure if there is a difference.

Seems like you could use pro rails on the Axys, Pro rails just a little thicker and less holes cut into them

Interesting....what length?

 

[ZRP Engineering]

Nothing is different from a geometry perspective.

Sent from my SM-G950U using Tapatalk

 

[raleigh111]

hum

Nothing is different from a geometry perspective.

Sent from my SM-G950U using Tapatalk

I was told rear mounting holes on slide rails are .400 different between the axys and pro? Sounds like you have some experience with this from previous post i have read. Can you confirm? i am looking to extend my sks to 163 and can find pro rails much cheeper then axys rails. I wanted to swap just the rails? Thanks in advance.

 

[Audette13]

Interesting....what length?

163 Axys in a 155 Pro chassis (last 2 seasons)

 

[SRXSRULE]

I was told rear mounting holes on slide rails are .400 different between the axys and pro? Sounds like you have some experience with this from previous post i have read. Can you confirm? i am looking to extend my sks to 163 and can find pro rails much cheeper then axys rails. I wanted to swap just the rails? Thanks in advance.

I have a set of 163 pro rails with a new set of iceage rail stiffeners I would sell. pm me if interested. Eric

 

[05rmksteve]

I have a set of 163 pro rails with a new set of iceage rail stiffeners I would sell. pm me if interested. Eric

PM sent.

 

[raleigh111]

https://www.snowest.com/forum/showthread.php?t=447485