I have my new 2011 pro torn down to put reeds in it. And I am not sure how the oil pump arm and link are clocked. When I unhooked it from the throtle body the spring on the pump arm snaped the link down, so its hard to tell want position it was in. I want to make sure I have it back on correctly. Please HELP!
pro oil pump
- Thread starter duramaxin
- Start date
Photos might help. You might try a flatlander forum with the rush.
Yeah, I like to take before photos, but if he doesn't have them then that won't help. Even an after photo would help. Maybe someone else can see it or even compare on their own.
Have you checked the Polaris parts diagram to see if that would help?
That diagram says it all thank you. The pump has no index mark so it not easy to figure out the home position. But that pic says all i need to know.
So what was the problem? Care to share, in case someone else does the same thing?
Well the pump arm has no stop, so if your not looking when take it off you can't tell were it was. And it doesn't have the two scrib marks like the older 800s. So rotate the arm CC tell the spring catches and align the knotch on the arm with the scrib mark on the pump.
