Pro Climb M8 Silber turbo TPS Wiring question

[Zone28M7]

I have a 2012 Pro Climb with a Silber turbo setup. There's some wiring that ties into the TPS and TPS connections right down by the TPS. There's a white male connector that I believe is the turbo side and there's a black female connector on motor side. The white connector has three wires in it being pink, red and black. All three popped out of the connector and connector is broken. The wires going into the black female connector are totally different colors. Basically what I need to know is the pin positions or color matchup between the black female and white male connectors for the TPS wiring harness.

Sent from my iPad using Tapatalk HD

 

[Zone28M7]

Anybody??


Sent from my iPad using Tapatalk HD

 

[Silber]

I will get pictures and wiring spec for you tomorrow. However if you look at the factory plug and just make sure the pins line up with correct layout: Power, Ground, Signal.

Thanks

 

[Zone28M7]

I will get pictures and wiring spec for you tomorrow. However if you look at the factory plug and just make sure the pins line up with correct layout: Power, Ground, Signal.

Thanks

Perfect. That's kind of what I figured but just wanted to be sure. Any reason I can't just hardwire solder this?

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[Silber]

Perfect. That's kind of what I figured but just wanted to be sure. Any reason I can't just hardwire solder this?

Sent from my SAMSUNG-SGH-I537 using Tapatalk

You could hard wire it if you want to.

 

[Polarisrocks]

Silber, its sure NICE to see a turbo dealer on here helping out its customers.

Thanks