Pro 800 and 600 RPM?

[snosumitcsr]

What RPM does everyone like to spin these at? I have a Stock 15 RMK 800 155 geared 20/46, And a Stock 14 Pro RMK 600 155 with Stock Belt Drive.
First year on a Polaris.

Rod

 

[BILTIT]

The 800 should be 8150, unsure about the 600's.

 

[sledneck_03]

What RPM does everyone like to spin these at? I have a Stock 15 RMK 800 155 geared 20/46, And a Stock 14 Pro RMK 600 155 with Stock Belt Drive.
First year on a Polaris.

Rod

the manual says for the 600 8250 rpm + or - 250 rpm rated operating rpm
the manual says for the 800 8250 rpm + or - 250 rpm rated operating rpm

 

[Esh]

8250 is the max rated rpm. The manual says 8250 +0/-250 rpm.

 

[Kcjepperson]

On the dyno sheets I have seen on a stock pro 8100-8150 was the highest the two curves got. I clutched my wife's to 8200 and if it drops a little on a pull its still in the sweet spot

 

[steepndeeper]

On the dyno sheets I have seen on a stock pro 8100-8150 was the highest the two curves got. I clutched my wife's to 8200 and if it drops a little on a pull its still in the sweet spot

Which machine does she ride what weights and spring did you end up with. I've just finished my 2015 600 RMK break-in and clutching suggestions would be appreciated.

 

[TRS]

You will notice a definite RPM difference with a cold versus hot pipe.