primary weight

[longrider]

Hi Guys. I am running a 2010 HCR. Added a D@D Y pipe. Going to go turbo this season. Also adding a 2.6 85duro powerclaw. I am running a P85 primary with Dalton adjustable weights, 911 response coverand glide washers. Stock sec. BDX gear case with stock gearing. Will be around two hundred horse. Looking for advice on what a good starting point wouild be for a base weight in the primary. Any thoughts on springs for the primary and sec. Looking forward to any advice.
Thanks.

 

[bradburck]

My .02, but I LOVE my MDS weights. Made a big difference for my sled over the set-up I had before. Give Steve a call and see what he can do for you.


Brad

 

[longrider]

Thanks for the reply. I will check into it.

 

[WyoBoy1000]

I ran daltons 72g for a pg 09 m8 at 10,000ft, then I put in the MDS and gained 7mph track speed, lower belt temps and just flew over hills. I could also adjust from 6-10lbs of boost without changing weight and still be in rpm range. I even went to 14lbs but I'm sure I wasn't getting max power running 8450rpm but it still worked.

 

[Pieguy]

MDS!!!!!!!!!!!
All the way!!!!!!!!!!!
They really work!!!!!!!!!!

 

[Rprecision]

My .02, but I LOVE my MDS weights. Made a big difference for my sled over the set-up I had before. Give Steve a call and see what he can do for you.


Brad

What did you change from?

What did you change to?

What made such a big difference ?

Thanks

 

[Snowmow]

Bump

 

[Readymedic]

MDS STEVE MDS STEVE MDS STEVE!!!!

 

[TINKER]

Weights

I have a good set of D&D adjustable weights I will sell you.they have about 400 miles on them is all . They adjust from 76 to 86 . I ran these in my 2010 snopro M8 at 78 rpm. These things work spot on. I ran orange grey spring and secondary was 39 helix with orange spring.
If you would like to talk about price or set up call me .
208-681-9948