Does anyone have the torque specs for the primary and secondary bolt? Also the torque specs for the bolts on the primary cover?
Primary and Secondary Clutch Torque Specs
- Thread starter RFleck17105
- Start date
Primary is 80ft lbs and secondary is 17 ft lbs that's what dealer said.
Primary cover bolts 100 in-lbs.
Service manual for 2010-2013 pro ride chassis says
80 ft. lbs for primary bolt (torque to 80 ft. lbs then run the motor through the rpm range and re-torque most people suggest)
100 inch lbs for primary cover bolts
18 ft. lbs for secondary bolt
20-30 inch lbs for weight pins
290-330 ft. lbs for spider jam nut
80 ft. lbs for primary bolt (torque to 80 ft. lbs then run the motor through the rpm range and re-torque most people suggest)
100 inch lbs for primary cover bolts
18 ft. lbs for secondary bolt
20-30 inch lbs for weight pins
290-330 ft. lbs for spider jam nut
