So I ripped my track in two the other day and I picked up a power claw. My question is should I just cut the outter nubs off and run the regular 3 pitch Wahl Bro drivers or spend the extra cash and get the Avid drivers made for the power claw? The one advantage I can see with the Wahl is if I decide to go with a Challenger Extreme I won't have to change drivers agian. But I would like some input on guys who have this track under the Pro and what drivers they are running.
Power Claw track what drivers?
- Thread starter sledhooligan
- Start date
Did you go w/ the 2013 2.6 power claw?
Using the drivers from Carls for my Power Claw. Non extro and hasn't ratcheted once.
Get the power claw drivers from avid. Do a search and there's a thread with pictures of them, but they are a cat style drivers that drive off of the 4 introvert nubs with the extroverts in case of ratcheting.
Power claw track
All 3" pitch drivers fit all 3" pitch tracks. You'll have to decide if you want to cut the bumps off the track ot not.
All 3" pitch drivers fit all 3" pitch tracks. You'll have to decide if you want to cut the bumps off the track ot not.
Same here. Running on sled since 2011.
With Carl's Avids, no need to cut rails and do anti stabs.
Have a look at this post.
http://www.snowestonline.com/forum/showthread.php?t=231578
IMO... The cat style drivers are superior in design... cutting off every other guide nub has its disadvantages.
The Cat style drivers are good to use on the challenger extreme tracks.
If you are going with the 2.6" P-Claw... you will need to run 7 tooth drivers.
.
http://www.snowestonline.com/forum/showthread.php?t=231578
IMO... The cat style drivers are superior in design... cutting off every other guide nub has its disadvantages.
The Cat style drivers are good to use on the challenger extreme tracks.
If you are going with the 2.6" P-Claw... you will need to run 7 tooth drivers.
.
Similar threads
