Polaris x-lite measurements

[mysledblows]

Hey snowesters' I need the center to center of the mount points for a Polaris x-lite rear skid. Is it the same as an x-10??

Thanks.

 

[Scott]

Not the same as an x-10.
Can't remember what it is though...it's around 28 1/4" if I remember right.

(wow, it's bee a long time since I played with an Xlite...I may be way off on my numbers though)

 

[mysledblows]

They look pretty close sitting on the bench so your probably pretty close. I have an x-10 with a holz coilover and that one is 27 1/4.

More input appreciated. Like to get the sled out of the garage thsi weekend.

 

[ExtremeTeam]

I think Scott is pretty close - either 28-1/4" or 28-1/2"


http://www.extremeteamfilms.com

 

[mysledblows]

Thanks guys. I'll start there and move it if I have to. It's only bolts and rivets right. Every hole I drill in the tunnel/drop brackets just makes the sled lighter - at least until it crumples...

 

[Scott]

You can put a lot of holes in the tunnels before they get weak...as long as you stay on those black mount pads on the inside.

Actually, if you stand the skid up, and roll the scissors and bell crank back into place with a ratchet, you can get the exact measurement down to within an 1/8th inch.

 

[mysledblows]

Will do.

I've made swiss cheese out of tunnels before. It's amazing how many holes a guy can drill in one and not have any problems.

Thanks.