polaris switchback assault rear tunnel brace

[bosssho]

I have an 11' SBA 144 and a 13' Pro RMK 155...my SBA's rear tunnel (right where my Poo gas rack is) is showing buckling on both sides. It's never almost been in an accident so I know it's gotta be from the gas tanks on there and the tunnel having no support braces.

Now...on the RMKs they come with these very beefy braces...steel or aluminum, whatever they are...but by buddy at the dealer says there is NO part # for those braces b/c they are part of the tunnel I guess....but they obviusly get installed onto the tunnel so they need to come from somehwere....

Does anyone on here know where and how to order....or does anyone know of any aftermarket ones that are similar? Thanks.

 

[sledneck_03]

I have an 11' SBA 144 and a 13' Pro RMK 155...my SBA's rear tunnel (right where my Poo gas rack is) is showing buckling on both sides. It's never almost been in an accident so I know it's gotta be from the gas tanks on there and the tunnel having no support braces.

Now...on the RMKs they come with these very beefy braces...steel or aluminum, whatever they are...but by buddy at the dealer says there is NO part # for those braces b/c they are part of the tunnel I guess....but they obviusly get installed onto the tunnel so they need to come from somehwere....

Does anyone on here know where and how to order....or does anyone know of any aftermarket ones that are similar? Thanks.

wrp makes some nice ones.

http://www.wr-products.com/collections/mountain-tunnel-stiffeners

 

[mickyd32]

Check out the bumper thread in this section. Lots of incorporated braces in there

 

[bosssho]

wrp makes some nice ones.

http://www.wr-products.com/collections/mountain-tunnel-stiffeners

Now see, I don't get why they say these are for PRO RMKS...since those sleds all have the bracing...at least on the 12s and 13s...

I attached Pics of what I am referring to exactly...so let me know if the WRP one will work on my 2011 SBA 144 ok...Thanks.

 

[a2jet16v]

mine has bent the black supports where the skid bolts in also. so i made my own, pretty simple.

 

[clunker]

i have a set of them that i took off a 12 assault if u would like to buy them

 

[bosssho]

i have a set of them that i took off a 12 assault if u would like to buy them

Shoot me a PM brother...I am in MA at 01824, thanks.

 

[danduvall]

I've been making these for the SBA 144" , if anyone is intrested. Pm me or call 3305509985

Sent from my DROID RAZR using Tapatalk

 

[Trailsweeper]

Now see, I don't get why they say these are for PRO RMKS...since those sleds all have the bracing...at least on the 12s and 13s...

I attached Pics of what I am referring to exactly...so let me know if the WRP one will work on my 2011 SBA 144 ok...Thanks.

Did you ever figure out that your SBA already has the brace your looking for? They are mounted inside the tunnel on the SBA instead of the outside like the RMK.

 

[bosssho]

Did you ever figure out that your SBA already has the brace your looking for? They are mounted inside the tunnel on the SBA instead of the outside like the RMK.

B/C I have NO ego for this stuff...I will ADMIT that NO, I did NOT know that, until you just said it, and I looked under the sled....

But...I had the brackets added to my SBA and they look mint, and...the facts are that the tunnel still buckled under the load of the bag or gas tanks and these brackets will only help or prevent it...plus I know have templates as a Machine Shop I sold a phone system to made them for me as well...