Pod filter/cage part number for YZ450

[Teej83]

Planning on assembling the snow bike this weekend. Unfortunately, travel has me away much of this week so I can't run out and measure

Can anyone recommend a pod filter cage/assembly I can buy for a 15 yz450? I plan on removing the stock box/filter assembly and sticking the pod in there, under the plastics (no cutting exterior). I am trying to make something easy to convert at the end of the season to switch back to dirt. Just trying to get this stuff ordered so it is at my door when I get home

Bonus credit/appreciation for any input on rubber elbow angle needed.

I have seen a lot of threads on the construction, just nothing with actual part #'s

Thanks much in advance

 

[SLDHVN]

Frozen Boost-
1 x T-Bolt Clamp for 2.0" Silicone Parts (CLA000100) = $2.60
1 x T-Bolt Clamp for 2.5" Silicone Parts (CLA000102) = $2.60
1 x Silicone Reducer, 45° bend - 2.5" to 2.0" - Black (BRE000905) = $19.99

__________________________________________
OUTERWEARS-

Details - Name -Unit Price - Quantity - Total
1946 - 20-1042 - $18.45 - 2 -$36.90


those are the parts i got last year, made a cage out of wire coat hanger, this was on a 13, not sure if there were any changes in the airbox going to a 15 model.

make sure you get the 20-1042 version of the outerwears since its water proof(versus the 10-1042). I ran two prefilters so no snow got through.

 

[RMKcowboy]

I'd have to dig out the part numbers, but I bought a pod from Uni, a couple Outerwears covers, a silicone coupler off Ebay, and PC Racing Flo shroud intake filters from RMMC for my 16 FX. All in all it cost me around $60 to build and works great. Some 2" exhaust tubing is also needed to connect the filter to the boot.