Pivoting Handlebar risers CHEAP!

[tomk]

I have a few sets of pivoting handlebar risers I built that I am trying to sell. they are 2",3",4,"6," and 8" tall and I am selling them for 30, 35, 40, 45,and 50. plus 5 for shipping unless you are in the central mn area you could pick them up. They are super strong 6061 billet aluminum and they work on almost any sled, email me or call 763-242-4588

 

[tomk]

Check out the site and these pics I just got 4 sets of risers polished I can seen the freckles on my nose with them! They are awesome!! unfortunately, it was not cheap, $20 was my cost so for my first sets I am selling them for $20 more than the brushed originals. new button on the site to buy them.

call 763-242-4588 or email, handlebarrisers@tkspecialtiesllc.com or just check out the website for any questions www.tkspecialtiesllc.com

thanks,
Tom

 

[tomk]

I am starting a new batch tomorrow, new rounded corner and pointed hex shapes available soon

 

[tomk]

new shapes are now available on the website www.tkspecialtiesllc.com

 

[tomk]

I am now making pivot adapters for the major 4 sled brands. it will be $15, mainly for guys who have bars with a steep rise in them since the original clamp and riser system makes the clamps wider.

 

[tomk]

check out these 11" risers perfect for summit xp riders, they are $85. also $10 off polished risers, pm if your interested

 

[RMKRAZIE]

wow they look like great!

 

[tomk]

I currently have only one set of polished risers, but more are at the polisher now, I have a ton in stock, getem now before the snow gets too deep! great christmas gifts...

 

[iniquity]

These look really great, and priced realistically too.
I have a 2004 king cat 900 with stock bars. I want to change my bars to pro taper countours but I just have to figure out a way to see how tall of a riser I can use without replacing any cables.

thanks.

 

[justjohnthomas]

Whats the overall width for the Yamaha adapter (How wide are the outsides of the two risers clamped down to it)? Putting it on a MSRX with stock bars where as most risers come out too wide and would hit the bend. Looking forward to ordering a 2" adapter and 6" rounded riser come payday. Now I just gotta find a great deal on cables....

 

[tomk]

Whats the overall width for the Yamaha adapter (How wide are the outsides of the two risers clamped down to it)? Putting it on a MSRX with stock bars where as most risers come out too wide and would hit the bend. Looking forward to ordering a 2" adapter and 6" rounded riser come payday. Now I just gotta find a great deal on cables....

with the pedestal adapter the risers will be the width of the stock clamp or just about as wide as the plate on the top of the steering post. if you are in minnesota I have a guy that makes new cables but he needs to see your old one to copy from. pm me if your interested.

thanks,
Tom

 

[tomk]

These look really great, and priced realistically too.
I have a 2004 king cat 900 with stock bars. I want to change my bars to pro taper countours but I just have to figure out a way to see how tall of a riser I can use without replacing any cables.

thanks.

I suggest just taking your bars off the clamp and lifting them up and have some one measure the distance, I can make the 1 1/8 hole for the bigger bars too!

 

[iniquity]

I suggest just taking your bars off the clamp and lifting them up and have some one measure the distance, I can make the 1 1/8 hole for the bigger bars too!

After looking it over I'm just going with the stock bars and your 3" riser. I just ordered it off your site and I'm very anxious to get them. Please ship fast.
thanks!!! -Peter

EDIT: I also need the adapter tube.

 

[WR]

I think they would look pretty sweet if you drilled holes in the solid 6061 bar all the way from top to bottom. It would save a bit of weight too!

 

[justjohnthomas]

Received Yamaha pedestal in the mail and can't wait to get it on. Ordered on the 13th in the afternoon, received yesterday (20th) in the morning. Tom sent me an emailing saying sorry for the wait because he didn't have any on hand and had to make one, which to me no sorry was needed. Great turnaround time in my book and a good price on a product that will allow me to run pivot adapters on the stock handlebars. Thanks again and keep up the good work.

 

[tomk]

I will be in west yellowstone, mt until the 3rd I will be returning emails and calls when I get back, Merry Christmas!!

testing new risers

 

[snowhippy]

risers

can u put holes in 6" risers ? . i would like a setof the hex ones if u can do this , thanks snowhippy or rick at 406-450-0004 cel.

 

[2DaMax]

sub

 

[tomk]

still selling, let me know if your interested

 

[tomk]

back for the new season!