PCIII setup on M1000 with Sno Pro Intake?

[Ricks 32]

Has anyone tried using the PCIII on an '09 M1000 with Sno Pro or BDX Intake? Sled has SLP pipe/can.

I've currently got the BD box on the sled right now. I ran the PC most of last year and I like it better than the BD box. I don't have the egt gauge on my sled so I was looking for some suggestions as where to add or take away fuel with the PC.

Thanks guys!

 

[DirtBoss]

Has anyone tried using the PCIII on an '09 M1000 with Sno Pro or BDX Intake? Sled has SLP pipe/can.

I've currently got the BD box on the sled right now. I ran the PC most of last year and I like it better than the BD box. I don't have the egt gauge on my sled so I was looking for some suggestions as where to add or take away fuel with the PC.

Thanks guys!

I am running that setup with a BDX intake. Starting with SLP's map installed in the PC, I ended up adding 3 bars of fuel on the high side.
No egt's but reading plugs and wash it is perfect.

 

[Ricks 32]

Thanks for the tip. That makes me feel better. This is the 2nd reponse I've received to the same question and both answers were the same. Both guys left the low and mid the same as SLP and then added 3 bars on the high end. I'm riding from 7k to 10k feet, mostly 8k to 10k.

thanks again.