Parting out 05 F7 EFI Sno Pro

[Devilmanak]

This sled IS being parted out. ECU is pending payment, recoil is paid.
Chris
simple@alaska.net

Here is the info/pics:
http://snowestonline.com/forum/showthread.php?t=242392

 

[05M7]

Ill take the injectors

 

[Devilmanak]

They are available if you would like them.
Chris

 

[mm700ak]

do you have the fuel pump? I need one for a 06 M7 efi, will yours work??pm me back. thanks

 

[Devilmanak]

I do have it, check here for part numbers to see if it will work:
http://www.skidoopartsnation.com/pages/home/default.aspx

 

[mm700ak]

well looked up the fuel pumps and they have different part numbers. The pictures are identical other than the f7 fuel pump has a pressure regulator and the m7 fuel pump doesnt. Would that effect my snowmachine and what does it do???

 

[Devilmanak]

Yah, not sure. May work fine, may not. The M7 probably has the regulator on the fuel rail or somewhere in between. If the F7 output isn't enough, it could lean down your sled and cause damage. I guess you could see what the M7 needs for pressure, the one on my sled was just checked a week ago, it was 42 psi in between the pump and fuel rail.

 

[RCR3]

how much for bulkhead and tunnel

 

[Devilmanak]

With or without rear heat exchanger?