I'm parting out my 2003 Polaris Edge RMK / Pro-X snomobile... This was custom built from a 03' Pro-X race sled into a 151" skid mountain mod sled. It has a 800cc motor built by Carl Struthers which puts out about 160hp, and also has a Boondocker nitorus system, full SLP exhaust system, SLP air box, one fully vented hood with no gauges or headlight(big air intake), one spare OE red hood with stock everything, Fox clicker shocks at the front and rear skid location, with a Fox coil-over at the front of the skid, SLP SLT skis, 6" riser, all billet aluminum idler wheels with 8" big wheels inside the rails at the back, custom built Holz tunnel with huge U-cooler, Boss seat, LED tail light, etc, etc..... Sled hit a rock with the left front and pushed the trailing arm back about 4".... So the mounting point is torn from the tunnel, the trailing arm weld is broken, and the front radius arm is bent, but that's it for the damage. I drove this 10 miles back to the trailer afterward, so its still in decent shape. The tunnel is NOT bent.... It could be fixed by a good welder, but I have no insterest or time to mess with it. Make me an offer on parts or the whole thing! Also have a RMK cover too..... Thanks, Jason
