Checking interest here, thinking about parting out my 2006 RMK that was involved in a rollover. Very Few parts were damaged, but it took a hit to the tunnel so its totaled. Checking interest, if I can get commitemnts on the major stuff (engine, track, skid etc) it'll be a go.
Lots of useful parts to covert your IQR to a MTN sled.
Parts available:
2006 600 HO engine 982 miles on it $2200 includes: Carbs, oil pump, waterpump recoil, CDI and harness, Y-pipe everything needed to make it run.
Secondary clutch $120
Brake disc $30
jackshaft $40
driveshaft $60
144 Skid with rail extensions to 151 with Fox CLicker rear shock and Walker Evans Center track shock, 3 8" wheels, all shocks/Hyfax were brand new this season and have 250 miles on them $700
Front A-arms left and right side, no damage and fresh lower ball joints $110 per lower arm with joint, $90 per upper arm with Joint
Stock spindals $100 for the pair
Stock front shocks with Red/springs $100
All 06 plastics, good condition with SLP Vent kits (Left side has a small crack by the footwell, has been repaired) $300 for the complete front end Left and Right Fenders, Nosepan, cover plate and hood hinge, WITHOUT side panels.
Side panels, right side has a small crack, left side is cracked pretty bad BO
Tunnel/bulkhead, straight except for the rear tunnel extension $400
Air box with SLP intake kit $50
Red hood, no damage $200
SLP pipe/can (some dents in the pipe, doesn't affect performance) $250
Chaincase $100
Seat $200
Undamaged console $30
151 x 2" track excellent condition, no missing paddles that I know of $300
Stock skis with good carbides $150
Red skid plate $25
Complete wire harness $50
Gas tank $125
Oil tank $45
Coolant bottle $30
Sno-flap $30
Stock radiator$50
Brake caliper
Brake master cylinder
Control switches
Stock Pipe ceramic coated $150
Stock Can $50
I'm Probably missing a bunch of parts off the top of my head
Here is a picture of it pre accident , don't have many handy.
My wife competing on it at her first Hill Drag
I can be reached at 218-590-4157 or email me at Ekuhlmey@yahoo.com
Lots of useful parts to covert your IQR to a MTN sled.
Parts available:
2006 600 HO engine 982 miles on it $2200 includes: Carbs, oil pump, waterpump recoil, CDI and harness, Y-pipe everything needed to make it run.
Secondary clutch $120
Brake disc $30
jackshaft $40
driveshaft $60
144 Skid with rail extensions to 151 with Fox CLicker rear shock and Walker Evans Center track shock, 3 8" wheels, all shocks/Hyfax were brand new this season and have 250 miles on them $700
Front A-arms left and right side, no damage and fresh lower ball joints $110 per lower arm with joint, $90 per upper arm with Joint
Stock spindals $100 for the pair
Stock front shocks with Red/springs $100
All 06 plastics, good condition with SLP Vent kits (Left side has a small crack by the footwell, has been repaired) $300 for the complete front end Left and Right Fenders, Nosepan, cover plate and hood hinge, WITHOUT side panels.
Side panels, right side has a small crack, left side is cracked pretty bad BO
Tunnel/bulkhead, straight except for the rear tunnel extension $400
Air box with SLP intake kit $50
Red hood, no damage $200
SLP pipe/can (some dents in the pipe, doesn't affect performance) $250
Chaincase $100
Seat $200
Undamaged console $30
151 x 2" track excellent condition, no missing paddles that I know of $300
Stock skis with good carbides $150
Red skid plate $25
Complete wire harness $50
Gas tank $125
Oil tank $45
Coolant bottle $30
Sno-flap $30
Stock radiator$50
Brake caliper
Brake master cylinder
Control switches
Stock Pipe ceramic coated $150
Stock Can $50
I'm Probably missing a bunch of parts off the top of my head
Here is a picture of it pre accident , don't have many handy.
My wife competing on it at her first Hill Drag
I can be reached at 218-590-4157 or email me at Ekuhlmey@yahoo.com
