Outerwear Prefilter Pod Size KTM 500XCW

[bigbull]

Looked around using search and can't find the size that some of you are using on the 13-14 KTM XCW when you use a reducing coupler hose to a prefilter pod in the air box location (with airbox removed)? Also open to whatever photos/ideas of pod style prefilters you are finding success with. Any help appreciated. Thank you in advance.
BB

 

[bdoe22]

wps

we use the western power/uni # UP-6229SA filter and 25-5900 pre-filter, a 2"-2 1/4" hose coupler from napa, a short piece of pvc pipe drilled for the temp sensor with riv-nuts inserted to bolt sensor in, remove the air intake boot, clamp adapter on tb and good to go.

its a 2.25" angled uni snow pod filter and the outerwears filter to match.

 

[J&L Snowhawk]

I have a been using the boondocker turbo prefilter sox with silicone intake reducers on all the kit I put together. work excellent. Give me a shout ill set u up. Les

 

[snowbikekits.com]

My '13 KTM has a 2" inlet to the throttle body. I bought a 15 degree uni pod filter and clamped it directly to the intake and then cable tied the sensor to the frame in an out of the way location.

 

[bigbull]

Thanks guys. Good info there. Les, I will probably give you a call shortly.
BB

 

[vmax1200]

Thanks for the parts ## anyone got some photos with this filter system installed

 

[PalousePoo]

Two guys I know riding XCW's have just installed the timbersled supplied prefilter over the stock airbox filter and maybe have dug snow out once. Nothing else to buy or install.