OTT Ice Scratchers on the new M8 rails

[Sergeant HCR]

Was wondering of anyone were able to fit the OTT ice scratchers on the new M8 rails with the pre-drilled holes for scratchers. Looking to get a set. They're cheaper than Cat's scratchers.

Thanks

 

[JTL]

I dont which brand I put on mine, but I had to drill the mounting holes out to 3/8". The bolt that came with them was a 3/8, and because the spring was just a bit shorter, I had to bore the front hole out to 3/8 as well, jsut to make them fit. Other than that, they fit fine.
Jason

 

[mezz250x]

I also just had to drill my holes bigger.

I just bought some cheap ones off of ebay cause they were powder coated orange, sctratchers must be all made at the same place since they all seem to have the same mounting locations.

 

[AkHockey10]

I have OTT scratchers on my m8 and yes, I had to drill the holes bigger..not by much though..

same on my ski-doo.

 

[Sergeant HCR]

Thanks guys....OTT scratchers are the plan then

 

[Pressurevac]

can anyone tell me how to get a hold of these OTT scratchers??

Cheers!

 

[Rucky]

I also just had to drill my holes bigger.

I just bought some cheap ones off of ebay cause they were powder coated orange, sctratchers must be all made at the same place since they all seem to have the same mounting locations.

I wish scratchers were all made in the same place. I had to drill out my factory holes... And then some. Kind of a pain in the azz. Made me wish I just bought the cat ones.

 

[AkHockey10]

can anyone tell me how to get a hold of these OTT scratchers??

Cheers!

Summitseeker, on here is who I got mine from. (along with a bunch of other people) Send him a PM and he'll get you squared away!



this will be my third or fourth year running the same scratchers.

Here is a link to Summitseekers add..
http://www.snowest.com/forum/showthread.php?t=181142