oil drool

[Tyamama]

Hey fellas. I run a mcx 180 on my nytro with a 'jake valve' and I'm still gettin enough drool from the vent to make a mess in the bottom. I'm considering running the vent to the outside and bypassing the catch tank in the mcx plenum. Has anyone done this or similar and what's the result? Thanks a lot for any feedback, I hate oily messes

 

[boostedballz]

What rpm is the machine running at? Three things will cause excessive oil to come out of the breather: A pinched or blocked vent or oil line, excessive rpm, excessive boost.

LL

 

[SNAFU]

I just took the vent line and ran it to a plastic water bottle. The hose fits inside the bottle neck perfectly. I poked a few holes near the top of the bottle so it can still breath. The bottle fits in beside the oil tank and collects all the brown milky goo. No mess.