Noise coming from track after fully clipping it.

[moto305]

I fully clipped my track on my 2017 SKS and now I'm getting a clicking sound up by the front of the rails. Any ideas?

 

[SRXSRULE]

If your running it on a stand, its the track clips hitting the rail caps. It wont do it when you ride it. Eric

 

[JMCX]

Is this a 3"? The small diameter of the seven tooth drivers make the clips hit hard on the rail tips. I have the Conquer and it is noisy.

 

[geo]

Probably the reason Poo clips these the way they do.

 

[Rick!]

I fully clipped my track on my 2017 SKS and now I'm getting a clicking sound up by the front of the rails. Any ideas?

SKS? Install a deeper lug track with the center cooler? Different drivers now? Need more info.

Probably the reason Poo clips these the way they do.

Clips are steel. Steel is heavy. The clips were asked if they wanted to stay or go. 1/2-2/3 of them left in in the early to mid 2000's and never came back. Not much steel left on RMKs now to make it the lightest stock sled out there.

 

[moto305]

Its a SKS with a 2.6 track. It makes the noise when it's on the stand and when you start going slowly while riding then goes away when you go faster. It seems to make more noise on the chaincase side.

 

[Indy_500]

No issues riding my fully clipped 2.6