Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

NEW PRODUCT: TPS Test Cable Kits

richracer1

Well-known member
Lifetime Membership
Here's something for you guys wanting to check and adjust your TPS. The test leads have terminals on them so the meter leads will fit in them nice and snug, freeing up your hands to make the necessary adjustments.

The Axys TPS test cable will only fit 2014 - 2018 Polaris model years. The instructions are written for the disassembly on Axys sleds, but the Pro-Ride base TPS setting is the same. 2014-1016 Pro-Ride idle settings are included. You will have to figure out what needs to be disassembled on the Pro-Ride sleds.

A power up cable is included along with instructions. You will need to provide a 12V battery and a good multi-meter.


For more Info... see this thread in swapmeet:

https://www.snowest.com/forum/showthread.php?t=441490

The TPS test cable:
 
Last edited:
FYI, for that that already have a power-up cable, the TPS test cable is available separately.
 
Just in, a Fuel Pump Prime pigtail cable. This pigtail will connect to any power-up cable and of course apply power to the fuel pump. Click the link in my first post for more information.

 
Last edited:
I now have Pro-Ride TPS Test Cables for the 2013 & OLDER model years.

These kits/cables are listed in same thread as the Axys TPS cables/kits.

 
FYI, per the service manual using the Fuel Pump Prime feature:

Run the fuel pump for no more than 10 seconds at a time. An audible change in the sound of the fuel pump will occur as the air is bled from the system.

Disconnect battery power from the connector prior to starting the engine.
 
Last edited:
Have you seen some of the sleds regulators not putting out exactly 5.0V.
Mine is outputting 5.05V when using the power up cable
 
Bumping this to the top for those looking for an easier way to check/adjust their TPS.
 
These are still available for both versions of the Pro-Ride: 2014 and newer as well as 2013 and older.
 
Premium Features



Back
Top