Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

NEW PRODUCT: TPS Test Cable Kits

richracer1

Well-known member
Lifetime Membership
NEW PRODUCT: TPS Test Cable Kit & Fuel Pump Prime Cable

Here's something for you guys wanting to check and adjust your TPS. The test leads have terminals on them so the meter leads will fit in them nice and snug, freeing up your hands to make the necessary adjustments.

The AXYS TPS cable will fit 2014-2018 model years.

A power up cable is included along with instructions. You will need to provide a 12V battery and a good multi-meter.


For more Info... see this thread in swapmeet:

https://www.snowest.com/forum/showthread.php?p=4141055#post4141055


The TPS test cable


The TPS Test Kit:
 
Last edited:
For those that already have a power-up cable, the TPS test cable is also available by itself.
 
In addition to the TPS test cable kit, I now have a fuel pump prime pigtail cable that will connect to any power-up cable.

There will be a stand-alone fuel pump prime cable that has battery clamps as well. These will be made to order.

Details will be in the linked swap meet thread that's in the original post I made here.

 
Last edited:
This is an FYI for anyone that's interested in a TPS test cable or kit. I now have TPS test cables for the 2013 and older sleds. So the test cables will now be listed as Axys TPS Test Cable (will fit 2014-2018) and Pro-Ride TPS Test Cable (2013 and OLDER models).

Please make sure you request the correct TPS test cable or kit for your sled.
 
FYI, per the service manual using the Fuel Pump Prime feature:

Run the fuel pump for no more than 10 seconds at a time. An audible change in the sound of the fuel pump will occur as the air is bled from the system. Disconnect battery power from the connector prior to starting the engine.
 
Last edited:
I just checked the2019 Polaris parts listing and my Axys TPS test cable will fit 2014 - 2019 800 & 600 TPS sensors.
 
Last edited:
Bumping this buried thread to the top for those looking to make checking/adjusting the TPS much easier.
 
I am trying to check my tps with your kit. 2016 800 axys pro. I am only getting 4.05 dc volts. Battery is good it shows 12.31 volts. Does this mean I need a new voltage regulator. Also if I check green wire it shows .939 volts.
thanks Clarke
 
Premium Features



Back
Top