New P-85 sticky?

[TheBreeze]

Changing out the weights on my '15 Pro. The primary looks super clean, but the sheave slides with a lot of resistance. Is it just a matter of the primary "wearing in" a bit?

 

[sled_guy]

You want the buttons good and tight, but you don't want it stuck so that it's hard to move. Fine line there I suppose on what is "stuck" and what is just tight.

Put it back together, put the sled up on a track stand and engage it. Typically a set of buttons that are too tight will manifest in a higher than expected initial engagement.

sled_guy

 

[TheBreeze]

It's a fresh clutch from the factory. I'll just hope it wears in. It's not "stuck" but had a bit more resistance that I would have thought

 

[s1d3w1nd3r1480]

Mine was the same way when I changed my weights. I took note of it and will check it periodically for the first couple trips to see if it improves at all. Engagement speed seemed reasonable considering I changed springs. I'll get a better idea when i can get it out on the snow and ride some.