Sled will idle but when accelerated, it bogs out . If I take the air intake and slightly cant it off of the air box for more air delivery, it runs much better. It has ran well previously before. I'm at a loss of why. I'm thinking to bypass the air box and put an air filter directly to the carb. Looking for answers .
Need sno sport help / carburetor
- Thread starter Beeline
- Start date
U
utah340six
Member
Start by cleaning the carb and jets. First
if you've cleaned the carb / jets / float be sure to check the plunger on the choke / cold start - sometimes they stick / bind.
So made a bit of headway. Jetting calls for 97.5 std size for sea level. I really figured it was lean due to the choke having to be on. So I had a 132.5 kicking around and it runs like a top. So I'm guessing I have a air leak somewhere maybe crank seal ? Thoughts? Cause according to the manual I need a 92.5 for my elevation and temp.
Hi turblue. Did your last fix resolve the issue? Just curious because i have an 05 with the exact same problem. Any advice would be greatly appreciated. Sorry for my lack of knowledge but what exactly do you mean by going to 132.5?
I did. It was a plugged passage in the carb body. I disassembled the carb and got some thin wire and cleaned every port and used carb cleaner ...blew them all and worked fine. 132.5 is the main jet.
Perfect. Thanks Turblue. I'll give it a try 
