Need RMK/RAW Skid Mounting Measurments

[winter]

I Need RMK/RAW Skid Mounting Measurments. 155 or 144

If any of you have a tunnel off a 07-08 RAW Chassis I need the stock skid mounting hole location.

1. Center of Drive Shaft to center of front mounting hole.
2. Top of tunnel ( Inside tunnel) to center of first hole.
3 Distance between centers of front and back mounting holes.
4 Top of tunnel to center of rear mountijng hole.

Thanks so much for your trouble, I am have trouble finding the exact numbers.

Winter.

 

[mountainhorse]

With a good Starrett tape.

1. Center of Drive Shaft to center of front mounting hole. 9 & 1/8”


2. Top of tunnel ( Inside tunnel) to center of first hole. 5 & 7/16”


3 Distance between centers of front and back mounting holes 31 & 7/8”


4 Top of tunnel to center of rear mountijng hole. 8 & 7/8”

 

[EricW]

With a good Starrett tape.

1. Center of Drive Shaft to center of front mounting hole. 9 & 1/8”


2. Top of tunnel ( Inside tunnel) to center of first hole. 5 & 7/16”


3 Distance between centers of front and back mounting holes 31 & 7/8”


4 Top of tunnel to center of rear mountijng hole. 8 & 7/8”

Ya, that was what I was going to say. LOL I was 1/64th off on the average of all 4 so I didn't post. Nice job MH.

 

[winter]

Thanks so much guys

Thanks so much guys, have a great summer.

 

[mountainhorse]

To the Top..

May come in helpful for Assault conversions to RMK or aftermarket RMK skids.

 

[827revdog]

Anyone have a measurement from the top of the tunnel to center of drive shaft /chain case?

 

[2002prox800]

specs for a 144 please

TTT looking for the specs for a 144 rmk skid install. thanks all