i have a 2005 summit 800 and i was out riding and it was running great. I shut it down for a quick break then when i started it back up it wouldnt move. it sounds great when it is idling but as soon as you try to give it gas it gets all boggy and wont move. i thoght i might have somthing to do with the dess key but no thats not the problem. any ides maby the dpm went in it i dont no were to start.
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
need help
- Thread starter rev800
- Start date
take the belt off the clutches and see if it does it. If it doesnt then start to look at your clutching. - Just a starting point.
ya i tried taking off the cluches and it still did it but what i did find is an plastic elbow that goes from the bake side of the carberator that is connected to a hose that runs through the dpm will that cause that much of a problem because it seems like it is getting way to much fuel
I
INKEDRIDER
ACCOUNT CLOSED
check your main jets!!!!!
check your main jets!!!!!!
check your main jets!!!!!!
pick up the back of the sled and see if you can spin the track by hand with the belt off. If it doesnt spin start looking at your chain case and you drive axle.
ya the track still spins like normal