F
Flatbed
Member
I installed a 08 Nytro MTN. skid in my old wedge chassis. I've never been around these skids much. It's the 153. After I installed it, I have about three inches of sag. If I push down on the rear of the sled the susp. goes down and does not rebound. The front shock is in the highest position and I have the rear springs in the H slot. Are the Yamahas always this soft or Am I missing something. The limiter strap is all the way out. I dropped a 670 Rotax in this chassis and thought I'd try a Yamy susp. No Arctic Cat parts yet. A little help would be appreciated. Thanks.