Need help!!2000 mxz 700

[skidooracing3]

i have a 2000 ski doo mxz 700 the other day i put new plugs in it and if ran fine, today i started it up let it warm up and when i took off i fouled a plug, so whatever i put a new set in and it ran fine...getting on down the road it shut off, i thought it was maybe the teather switch or just the kill switch, but i cant quit figure it out, because it will die out, and i can start it up in one pull, and it runs fine again until it dies. sometimes it will run for 10 minutes and sometimes it ill run for 5 seconds, i cleaned the carbs and have tried diffrent plugs again but still think it is coming from the kill switch is the only thing i can think of....someone please help me....thank you or could it possibly be the tether switch at all??

 

[skidooracing3]

to try that is there anyway to reroute the kill switch?? thanks

 

[FIII_Mtn]

From my own experiences, the tether making bad contact/ no contact won't kill the ignition. Suppose it could be the stop switch, but doesn't seem likely to me, either. Stator going bad, maybe... I guess I'd probably start by looking at all the wiring for any scrapes, cuts, chafes, burns... maybe someone else will have betterr ideas.

 

[skidooracing3]

well ill look around , thanks

 

[m-waage2]

Bad DESS connection?
If you can get ahold of another one they just plug right in, could test it that way.