Need a little help!!!

[HillBillydoo]

Happy new year to all went up by the bear river lodge wedsday unloaded my sled ran sludish. Turned it off, would not resart. I lost all my spark. Were should i look first.. New plugs kill switch working fine..

 

[weetee]

Check your wiring for rub spots that could be grounding out. First thing I do when I buy a new sled is rub proof wires, hoses, & cables.

 

[HillBillydoo]

Ya i looked for the obvious.. But couldnt see any thing.

 

[BossRev]

Whats the make and model? Different sleds have different things to look for.

 

[HillBillydoo]

03 summit highmark 800 ho..

 

[BossRev]

03 summit highmark 800 ho..

stator.

 

[mgcm1000]

Possibly the stator -- had it go on 2 sleds of mine last year

 

[HillBillydoo]

Thanks for the replys would the stator make it run like the choke was on then just die?

 

[Kevco]

Id look for a rub, I was towed out of race bowl ona Gen II 700 and it turned out it was a rubbed wire. Either way elc. probs suck!

 

[Skidoox]

I would check the computer
find someone with the same year sled and try their computer
if that does not fix the problem then I would test stator

If the DPM is not working the sled will run rich and could foul the plugs

 

[built4dtuff]

I would check the computer
find someone with the same year sled and try their computer
if that does not fix the problem then I would test stator

If the DPM is not working the sled will run rich and could foul the plugs

Agreed. I went to help tow out a Rev and the dude had borrowed an ECM from another sled and there was no towing needed after the swap....I wasnt there when it went down but there was no spark before he put the new ecm in...Good luck