Here we go again; I know this is a dumb question but I though I would try again. Power World no way, Did not buy from Felkers so in my experience up there is you are so far back on the burner its not even funny. I have an 08 xp with head can and clutch set up, I am entertaining a big bore set up but want it DIALED in for this EPIC winter. I dont care about driving to Wyoming if I have to. Anyone?
Mod Shop close to Denver?
- Thread starter snowdrew00
- Start date
I think that if you really want your sled dialed in you will need to go to Felker. Xtreme is the only other dealer I would recommend. I'm sure if you get down to Felker soon, you can get your sled back sooner.
My only other recommendation is to contact Donovan Facey. I heard he is going to do some mechanic work on sleds this winter.
My only other recommendation is to contact Donovan Facey. I heard he is going to do some mechanic work on sleds this winter.
K
kodpkd
Well-known member
The best
Sometimes the best is worth the wait... I would give Felkers a chance.. Have you really been there? Don't believe all the rumors. I see guys come in all the time for mods on their sleds not bought there.. He can give you all you can hang onto.. If you let him start with his basic setup,, then go up from there,,, I am sure you will be happy.. He is going to get busy setting up the new sleds soon..
Sometimes the best is worth the wait... I would give Felkers a chance.. Have you really been there? Don't believe all the rumors. I see guys come in all the time for mods on their sleds not bought there.. He can give you all you can hang onto.. If you let him start with his basic setup,, then go up from there,,, I am sure you will be happy.. He is going to get busy setting up the new sleds soon..
PM me your contact info so I may use you as a reference. I too, need a good setup man or warranty work stuff but I am afraid that since my sled came from elsewhere that I will be put behind other clients and that I may be told to kiss azz. I'm not allowed in PowerWorld (crooks anyways) and the Steamboat dealer has been changing hands so much that I'm afraid to go there.
Do you know what Lynn's take is on boost for XPs?
I have been there but never had any work done. I have BJ's clutch set up and a torque line head which are both frowned upon from talking to them. Sad thing is I bet his stock set up would woop my ars. Lesson learned I guess.
Drew- I've gotta confess, after seeing your XP the day that the 7 Sisters slid, and hearing your report, I ordered mine.
This pretty much says it all:
Eagle Sno Drags
If you want it to rip, there's only one place to go.
I've sent several referrals their way, and each was pretty psyched.
Yes, they do take care of their own naturally.
But from what I've seen, they work hard to expand their customer base too!
Good luck,
MD.
This pretty much says it all:
Eagle Sno Drags
If you want it to rip, there's only one place to go.
I've sent several referrals their way, and each was pretty psyched.
Yes, they do take care of their own naturally.
But from what I've seen, they work hard to expand their customer base too!
Good luck,
MD.
Last edited:
K
kodpkd
Well-known member
Lynn isn't against a good head on the new 800 engine... If they work. He has seen so many destroy a good engine.. His setup is pretty good..
Make a date to ride this wintewr,,,, Lots O fun.. We are never against some fun new guys..
Second that, Rick is a great guy to deal with. He really knows his $hit. I have an 860 BB from him now and it runs great. He is the only one in the denver area that will work on my stuff.
Drew- I've gotta confess, after seeing your XP the day that the 7 Sisters slid, and hearing your report, I ordered mine.
This pretty much says it all:
Eagle Sno Drags
If you want it to rip, there's only one place to go.
I've sent several referrals their way, and each was pretty psyched.
Yes, they do take care of their own naturally.
But from what I've seen, they work hard to expand their customer base too!
Good luck,
MD.
Whats up Corey hows was the summer, get the cabin finished? Got the itch again cant wait for the snow to fly. I knew the answer when I posted, just want to find a good home that I can buy sleds and are mod friendly. Detour people from people from Schofield this weekend would ya
set-up
Rick at Peak performance,knows his sh!!.And a good guy to work with,he will be at the snow show.He told me he was going to bring his 860bb xp,which he said he is putting a turbo on.Should be pretty cool.And his pricing is reasonable,it won't cost 650$ like felkers,but from what i've heard Lynn is really good also.
Rick at Peak performance,knows his sh!!.And a good guy to work with,he will be at the snow show.He told me he was going to bring his 860bb xp,which he said he is putting a turbo on.Should be pretty cool.And his pricing is reasonable,it won't cost 650$ like felkers,but from what i've heard Lynn is really good also.
