mm700 mods..help please

[MtnMaxMod]

just need to know if any of these mods are worth the money..and if any of you have done em tell me how you liked them and all that good stuff

roller scondary from mpi - 46/42 helix

peak head from mpi

20/42 gearing

(also i plan on buying the lightweight drop brackets from mpi..does any one know if these are the same height as the stockers..just lighteR? or do they raise the sled up too?)

 

[M.M. 700]

46-42 helix. YES big improvement

Peak head, No


Gearing down, is preference, but I took a tooth off the top and am happy

 

[MtnMaxMod]

thanks man

saved me a whole $350 bucks..now maybe i can afford a boss seat...almost.

 

[Super Sled]

On a Triple Piped Viper get the Peak head for sure -- but you are talking a MM, so probably not necessary.

MPI Roller Secondary -- These rock. You don't know what you are missing until you install and then remove this from your sled........ I removed mine and plan to re-install before ever heading out west again.

Mike

 

[Super Sled]

On a Triple Piped Viper get the Peak head for sure -- but you are talking a MM, so probably not necessary.

MPI Roller Secondary -- These rock. You don't know what you are missing until you install and then remove this from your sled........ I removed mine and plan to re-install before ever heading out west again.

Mike

Oh and i forgot -- best mod is the Boss Highrise Widetop. First mod a guy should do. And i have no affiliation with Boss other than there seats are the real deal so I like them.....

 

[mtnmax97]

Buy the MPI weight transfer kit and a hartman polaris primary clutch

 

[M.M. 700]

X2

MPI X-fer enhancement kit is a good $50 spent

 

[Yamaha_nisse]

BOSS Seat High Rise
6" riser + Fatbar handlebar
Betterboards
NEW SKIS (I prefer SLP PowderPro)

These are the "MUST DO" things


Then,
Lightweight hood
Lightweight T-arms with replaceable mid-section


(If you allready have the usual, Pipes, new weights & springs)


Thanks Rasmus

 

[catmechanic]

On a Triple Piped Viper get the Peak head for sure -- but you are talking a MM, so probably not necessary.

MPI Roller Secondary -- These rock. You don't know what you are missing until you install and then remove this from your sled........ I removed mine and plan to re-install before ever heading out west again.

Mike

what year mm are we talking? would any of the above things in this thread help a 99 mm 700 stretched to 151 or an 03 mtn viper 700 for that matter. i am talking clutch, transfer kit, etc?

 

[MtnMaxMod]

already got most of the mods you guys are talking about.
151" camo
extroverts
transfer enhancment kit
simmions skis
just bought a br tech thrasher hood
5 inch risers w/ pro tapers
aaen triples

do vforce3's or boysen rad valves help a lot on these motors? i remember throwing vforce 3's into my YZ125 and Blaster motors and it was whole nother animal.

wish i could find a boss seat for cheap.

 

[M.M. 700]

wish i could find a boss seat for cheap.

http://www.snowest.com/forum/showthread.php?t=158787

 

[cappel]

I put v force 3's in my Max but have heard the Boysen are better.

 

[MtnMaxMod]

thanks MM 700! hope i pm'd the guy in time lol..

and cappel, i planned on buying boysen anyway. mpi has em on sale for $175 i believe.

 

[yam_apex91469]

here's my setup (see signature below) The sled rips, but weight is the problem. You just can't toss it around - That's why I went to the XP