MCXpress turbo end play

[Apex06]

i have a yam phazer turbo chargered and was wondering if anyone had the specs for end play "in and out" and " up and down" on it.

 

[Climbmax]

Not an expert but it should have very little. Can you see if the housing has been contacted by the turbine fins? If so you need help. It will have some play on the shaft back and forth but only a little.
Call ADP if you need some service.....604-888-3726.
Best of luck
RS

 

[Lunch_Box]

There should be no play but very minimal play up and down will happen. In and out is bad and a good sign that your turbo is in need of a rebuild.

 

[Apex06]

ADP? where are they located?

Not an expert but it should have very little. Can you see if the housing has been contacted by the turbine fins? If so you need help. It will have some play on the shaft back and forth but only a little.
Call ADP if you need some service.....604-888-3726.
Best of luck
RS

 

[Quicksilver]

Here's the link for ya
http://www.adpdistributors.com/facilities.html