MCX nytro burning belts

[flajjpan]

Anybody has the same problem? I must change belt every 200-500km since I mount turbo.

I have the white secondary spring in hole 1-9. I have put pre-filter over the vent hole so I dont think its snow coming in.

This makes me crazzyyyyy!!E!%R!%

//mike from sweden.

 

[Mcx Nytro]

sounds like you are getting slippage...what primary setup???Is that a white Yami spring??? Still on the same belt for 900 ks with the turbo

 

[alrevedup]

My guess is that your primary spring is engauging at too high of a rpm and burning the belt. What spring are you running. It took 4 to get where I like it.
Y-P-Y

910 miles on the only belt. Knock on wood

 

[flajjpan]

Yes its the yami white spring.

I have stm wheigts and stock primary spring.

What setup are you running?

//mike

 

[alrevedup]

Don't know what your elevation is, but at 9000 to 12500 I like Yamaha Yellow-pink-Yellow the best

 

[skidooboy]

try this thread out, should help alot. ski
http://www.snowest.com/forum/showthread.php?t=66267

 

[Mcx Nytro]

Yes its the yami white spring.

I have stm wheigts and stock primary spring.

What setup are you running?

//mike

I started with the 8bu fully loaded(17.2 in both) with an arctic red/white or purple or yellow sec spring. set @ 0/1 Also went to the 14.5 rollers, shockwave helix set @ 51

I have since changed the weights out just experimenting

 

[flajjpan]

I should try the red/white spring.

I ride in 1500-5000ft we dont have that high mountain in sweden like you have.